HomeMy WebLinkAbout2009 CROSSROADS BLVDINVOICE DATE
DUE DATE
INVOICE #
TOTAL DUE
05/02/2024
06/10/2024
2024-00000327
$80.00
Customer #: 10052
IHOP/JBZ ENTERPRISES
2825 E 13TH ST
PO BOX 108
AMES, IA 50010
Please Make Check Payable and Remit To:
City of Waterloo
ATTN: City Clerk/Accounts Receivable
715 Mulberry St
WATERLOO, IA 50703
Amount Enclosed:
DETACH AND RETURN TOP PORTION WITH YOUR PAYMENT
KEEP THIS PORTION FOR YOUR RECORDS
COMMERCIAL INSPECTION - 2009 CROSSROADS BLVD - 4-11-24
FOR BILLING INQUIRY: (319)291-4323
[ Description
INSPECTION 2,000
OCCUPANCY FEE
Total Price ]
$70.00
$10.00
CUSTOMER #
BILLING DATE
DUE DATE
INVOICE #
CHARGES
10052
05/02/2024
06/10/2024
2024-00000327
$80.00
Less Prepayment
Total Due -*
City of Waterloo
$0.00
$80.00
Failure to pay in full debts listed herein within ninety days of the due date will result in an additional twenty-five percent
late fee applied to any outstanding balance. The delinquent account will be forwarded to Municipal Collections of
America for further collection efforts. Debts shall also be subject to collection through the Iowa Department of
Administrative Services Offset Program if not paid in full within ninety days.
WATERLOO FIRE RESCUE
INSPECTION REPORT
IHOP, 2009 CROSSROADS BLVD, BLDG 2009 CROSSROADS BLVD, WATERLOO /A 50702
DETAILS
Inspection Date: 04/11/2024 I Inspection Type: Annual Inspection (1Yr) I Inspecti
Unit: N/A i Lead Inspector: JEREMIAH VANDYKE I Other Inspectors: N/A ! Fe
VIOLATIONS AND COMPLIANCES
Shift: N/A I Station: N/A I
Showing only violations and images for this inspection. Please reach out to the lead inspector for more details.
Resolved Violations: 0 Passed Codes: 31 I Violations: 26 I N/A Codes: 31
STATUS CODE DESCRIPTION
FAIL 105.1.1 - Permits required. A property owner or owner 's authorized agent who intends to conduct an
operation or business, or install or modify systems and equipment that are
regulated by this code, or to cause any such work to be performed, shall first
make application to the fire code official and obtain the required permit.
FAI L
105.1.1 - Permits required.
Location: Water heater room
Original Comment: Permit will be needed for water heater by licensed contractor
and inspected by City of Waterloo plumbing inspector.
A property owner or owner 's authorized agent who intends to conduct an
operation or business, or install or modify systems and equipment that are
regulated by this code, or to cause any such work to be performed, shall first
make application to the fire code official and obtain the required permit.
Location: Roof top.
Original Comment: Proper permits will be needed by licensed contractors to
repair any electrical or replacements of fans.
Printed on 04/11/2024 @ 15:45
Page 1 of 14
STATUS
CODE
DESCRIPTION
FAIL 1203.2.15 - Means of egress Emergency power shall be provided for means of egress illumination in
FAI L
illumination.
accordance with Sections 1008.3 and 1104.5.1.
Location: Near Walk in freezer.
Original Comment: Egress light tested and failed.
1203.2.15 - Means of egress Emergency power shall be provided for means of egress illumination in
illumination. accordance with Sections 1008.3 and 1104.5.1.
Location: Men's restroom
Original Comment: Egress light tested and failed.
FAIL 1203.2.6 - Exit signs. Emergency power shall be provided for exit signs as required in Section 1013.6.3.
The system shall be capable of powering the required load for a duration of not
less than 90 minutes.
Location: South Exit door.
Original Comment: Exit light tested and failed.
Printed on 04/11 /2024 @ 15:45
Page 2 of 14
STATUS
FAI L
FAI L
CODE
304.3.1 - Spontaneous
ignition.
315.3 - Storage in buildings.
DESCRIPTION
Materials susceptible to spontaneous ignition, such as oily rags, shall be stored in
a listed disposal container. Contents of such containers shall be removed and
disposed of daily.
Location: Kitchen area.
Original Comment: UL listed oily rag disposal container needed. (Red Metal Can)
Storage of materials in buildings shall be orderly and stacks shall be stable.
Storage of combustible materials shall be separated from heaters or heating
devices by distance or shielding so that ignition cannot occur.
Location: Closet near office and old break room/water softener room.
Original Comment: Storage needs to be cleared and orderly stacked. Storage was
falling on me during inspection.
406.3 - Employee training Employees shall be trained in fire prevention, evacuation and fire safety in
program.
accordance with Sections 406.3.1 through 406.3.4.
Location: Not Provided
Original Comment: Employee training plans needed in the event of an emergency.
Printed on 04/11/2024 @ 15:45
Page 3 of 14
STATUS CODE DESCRIPTION
FAIL 407.2 - Safety Data Sheets. Safety Data Sheets (SDS) for all hazardous materials shall be either readily
available on the premises as a paper copy, or where approved, shall be permitted
to be readily retrievable by electronic access.
Location: All chemicals or oils.
Original Comment: MSDS sheets needed on site for all cleaning chemicals and
oils.
FAIL 505.1 - Address identification. New and existing buildings shall be provided with approved address
identification. The address identification shall be legible and placed in a position
that is visible from the street or road fronting the property. Address identification
characters shall contrast with their background. Address numbers shall be
Arabic numbers or alphabetical letters. Numbers shall not be spelled out. Each
character shall be not less than 4 inches (102 mm) high with a minimum stroke
width of 1/2 inch (12.7 mm). Where required by the fire code official, address
identification shall be provided in additional approved locations to facilitate
emergency response. Where access is by means of a private road and the
building cannot be viewed from the public way, a monument, pole or other sign
or means shall be used to identify the structure. Address identification shall be
maintained.
Location: Outside of building.
Original Comment: Address signage has been painted and unable to see from
street.
Printed on 04/11/2024 @ 15:45
Page 4 of 14
STATUS CODE DESCRIPTION
FAIL
FAIL
603.2 - Abatement of unsafe Identified electrical hazards shall be abated. Identified hazardous electrical
conditions and electrical conditions in permanent wiring shall be brought to the attention of the
hazards. responsible code official. Electrical wiring, devices, appliances and other
equipment that is modified or damaged and constitutes Conditions that
constitute an electrical shock or fire hazard shall be abated not be used.
Location: LCP breaker box near walk in freezer/fridge.
Original Comment: Door is not locked on electrical panel and the employees have
to manually turn on outside lights on a broken timer that needs to be fixed.
603.2 - Abatement of unsafe Identified electrical hazards shall be abated. Identified hazardous electrical
conditions and electrical conditions in permanent wiring shall be brought to the attention of the
hazards. responsible code official. Electrical wiring, devices, appliances and other
equipment that is modified or damaged and constitutes Conditions that
constitute an electrical shock or fire hazard shall be abated not be used.
Location: Fryer timer cord.
Original Comment: Fryer timer cord is breaking down and thinning through jacket
and needs to be replaced.
Printed on 04/11/2024 @ 15:45
Page 5 of 14
STATUS CODE DESCRIPTION
FAI L
FAI L
603.2 - Abatement of unsafe Identified electrical hazards shall be abated. Identified hazardous electrical
conditions and electrical conditions in permanent wiring shall be brought to the attention of the
hazards. responsible code official. Electrical wiring, devices, appliances and other
equipment that is modified or damaged and constitutes Conditions that
constitute an electrical shock or fire hazard shall be abated not be used.
Location: Both Walk in freezer and refridgerator.
Original Comment: Heat tape cord located on pipes near ceiling that need to be
addressed by LICENSED electrical contractor and LICENSED plumbing contractor.
603.2 - Abatement of unsafe Identified electrical hazards shall be abated. Identified hazardous electrical
conditions and electrical conditions in permanent wiring shall be brought to the attention of the
hazards. responsible code official. Electrical wiring, devices, appliances and other
equipment that is modified or damaged and constitutes Conditions that
constitute an electrical shock or fire hazard shall be abated not be used.
Location: Walk in refridgerator.
Original Comment: Ceiling light has exposed wiring needs to be replaced or
repaired by LICENSED electrician.
Printed on 04/11/2024 @ 15:45
Page 6 of 14
STATUS CODE DESCRIPTION
FAIL
FAIL
603.2 - Abatement of unsafe Identified electrical hazards shall be abated. Identified hazardous electrical
conditions and electrical conditions in permanent wiring shall be brought to the attention of the
hazards. responsible code official. Electrical wiring, devices, appliances and other
equipment that is modified or damaged and constitutes Conditions that
constitute an electrical shock or fire hazard shall be abated not be used.
Location: Roof top.
Original Comment: Broken off electrical switch boxes that need to be addressed
by licensed contractor and inspected by City of Waterloo electrical inspector.
603.2 - Abatement of unsafe Identified electrical hazards shall be abated. Identified hazardous electrical
conditions and electrical conditions in permanent wiring shall be brought to the attention of the
hazards. responsible code official. Electrical wiring, devices, appliances and other
equipment that is modified or damaged and constitutes Conditions that
constitute an electrical shock or fire hazard shall be abated not be used.
Location: Roof top fan for fryers.
Original Comment: Broken electrical wiring located in fan that must be addressed
by Licensed electrical contractor.
Printed on 04/11/2024 @ 15:45
Page 7 of 14
STATUS CODE DESCRIPTION
FAIL
FAIL
603.2 - Abatement of unsafe Identified electrical hazards shall be abated. Identified hazardous electrical
conditions and electrical conditions in permanent wiring shall be brought to the attention of the
hazards. responsible code official. Electrical wiring, devices, appliances and other
equipment that is modified or damaged and constitutes Conditions that
constitute an electrical shock or fire hazard shall be abated not be used.
Location: Roof top fan.
Original Comment: Roof top fan covered with blue tarp. Must be addressed by
licensed electrical contractor.
603.2 - Abatement of unsafe Identified electrical hazards shall be abated. Identified hazardous electrical
conditions and electrical conditions in permanent wiring shall be brought to the attention of the
hazards. responsible code official. Electrical wiring, devices, appliances and other
equipment that is modified or damaged and constitutes Conditions that
constitute an electrical shock or fire hazard shall be abated not be used.
Location: Near office hallway light.
Original Comment: Water leak from roof dripping into light balast. I tapped on
light to find water dripping from light. Must be address water leak and repair light
by licenned contractor.
Printed on 04/11/2024 @ 15:45
Page 8 of 14
STATUS CODE DESCRIPTION
FAI L
FAI L
603.2 - Abatement of unsafe Identified electrical hazards shall be abated. Identified hazardous electrical
conditions and electrical conditions in permanent wiring shall be brought to the attention of the
hazards. responsible code official. Electrical wiring, devices, appliances and other
equipment that is modified or damaged and constitutes Conditions that
constitute an electrical shock or fire hazard shall be abated not be used.
603.2.2 - Unapproved
conditionsOpen electrical
terminations.
Location: Water heater room.
Original Comment: Hanging space heaters need to be addressed by licensed
contractor and inspected by City of Waterloo Electrical inspector.
Open junction boxes and open -wiring splices shall be prohibited. Approved
covers shall be provided for all switch and electrical outlet boxes.
Location: Water heater room.
Original Comment: Open wiring on wall needs to be addressed.
Printed on 04/11/2024@ 15:45
Page 9 of 14
STATUS CODE DESCRIPTION
FAI L
603.5 - Relocatable power
taps and current
taps.Multiplug adapters.
Multiplug adapters, such as cube adapters, unfused plug strips or any other
device not complying with NFPA 70 shall be prohibited. The construction and use
of current taps and relocatable taps shall be in accordance with NFPA 70 and this
code.
Location: Office desk area.
Original Comment: Multiple power strips plugged into each other (Daisy chained)
that must be removed.
FAIL 603.6 - Extension cords. Extension cords and flexible cordsshall not be a substitute for permanent wiring
and shall be listed and labeled in accordance with UL 817. Extension cords and
flexible cordsshall not be affixed to structures, extended through walls, ceilings
or floors, or under doors or floor coverings, nor shall such cords be subject to
environmental damage or physical impact. Extension cords shall be used only
with portable appliances. Extension cords marked for indoor use shall not be
used outdoors.
Location: Kitchen area.
Original Comment: Remove orange extenstion cord and power strip.
Printed on 04/11 /2024 @ 15:45
Page 10 of 14
STATUS CODE DESCRIPTION
FAIL 603.6 - Extension cords. Extension cords and flexible cordsshall not be a substitute for permanent wiring
and shall be listed and labeled in accordance with UL 817. Extension cords and
flexible cordsshall not be affixed to structures, extended through walls, ceilings
or floors, or under doors or floor coverings, nor shall such cords be subject to
environmental damage or physical impact. Extension cords shall be used only
with portable appliances. Extension cords marked for indoor use shall not be
used outdoors.
FAI L
603.9.4 - Prohibited areas.
Location: Water heater room.
Original Comment: Multiple extension cords need to be removed ,including cord
running through wall from closet near office.
Portable, electric space heaters shall not be operated within 3 feet (914 mm) of
any combustible materials. Portable, electric space heaters shall be operated
only in locations for which they are listed.
Location: Water Heater room
Original Comment: Portable Space heaters need to be removed from room.
Printed on 04/11/2024 @ 15:45
Page 11 of 14
STATUS CODE DESCRIPTION
FAIL 704.1 - Maintaining Where required when the building was originally constructed, materials and
protection. systems used to protect joints and voids in the following locations shall be
maintained. The materials and systems shall be securely attached to or bonded
to the adjacent construction, without openings visible through the construction.
1 Joints in or between fire -resistance -rated walls, floors or floor/ceiling
assemblies and roof or roof/ceiling assemblies. 2.joints in smoke barriers. 3.Voids
at the intersection of a horizontal floor assembly and an exterior curtain wall.
4.Voids at the intersection of a horizontal smoke barrier and an exterior curtain
wall. 5.Voids at the intersection of a nonfire-resistance-rated floor assembly and
an exterior curtain wall. 6.Voids at the intersection of a vertical fire barrier and an
exterior curtain wall. 7.Voids at the intersection of a vertical fire barrier and a
nonfire-resistance-rated roof assembly. Unprotected joints and voids do not
need to be protected where such joints and voids were not required to be
protected when the building was originally constructed. Where the system design
number is known, the system shall be inspected to the listing criteria and
manufacturer's installation instructions.
Location: Ceiling tiles near office hallway.
Original Comment: Damaged ceiling tiles or missing ceiling tiles that need to be
replaced.
Printed on 04/11/2024 @ 15:45
Page 12 of 14
STATUS CODE DESCRIPTION
FAIL 704.1 - Maintaining Where required when the building was originally constructed, materials and
protection. systems used to protect joints and voids in the following locations shall be
maintained. The materials and systems shall be securely attached to or bonded
to the adjacent construction, without openings visible through the construction.
1.joints in or between fire -resistance -rated walls, floors or floor/ceiling
assemblies and roof or roof/ceiling assemblies. 2.Joints in smoke barriers. 3.Voids
at the intersection of a horizontal floor assembly and an exterior curtain wall.
4.Voids at the intersection of a horizontal smoke barrier and an exterior curtain
wall. 5.Voids at the intersection of a nonfire-resistance-rated floor assembly and
an exterior curtain wall. 6.Voids at the intersection of a vertical fire barrier and an
exterior curtain wall. 7.Voids at the intersection of a vertical fire barrier and a
nonfire-resistance-rated roof assembly. Unprotected joints and voids do not
need to be protected where such joints and voids were not required to be
protected when the building was originally constructed. Where the system design
number is known, the system shall be inspected to the listing criteria and
manufacturer's installation instructions.
Location: Closet near office and in water heater room.
Original Comment: Licensed contractor will need PERMIT to repair hole in wall
leading from closet to water heater room and inspected by City of Waterloo
Building inspector.
GENERAL NOTES
JEREMIAH VANDYKE - 04/11/2024 @ 15:20 Fire extinguishers serviced by Summit Fire March 2024.
JEREMIAH VANDYKE - 04/11/2024 @ 15:20 01 /31 /2024 S - (Quarterly) Kitchen Exhaust ALL CLEAN OF IOWA, INC. Reviewed
Compliant
JEREMIAH VANDYKE - 04/11/2024 @ 15:20 S - Kitchen Hood Suppression SUMMIT FIRE PROTECTION Reviewed Compliant
JEREMIAH VANDYKE - 04/11/2024 @ 15:23 Contact Black Hawk County Dispatch of any changes for emergency 24 hour contacts in
the event of an emergency at that address. Phone # 319-291-2515.
JEREMIAH VANDYKE - 04/11/2024 @ 15:23
Re -inspection dates are automatically generated 30 days out from the initial
inspection. Normal operating hours for inspections & re -inspections are Monday -
Friday, 8:00 a.m. - 5:00 p.m. If the automatically generated re -inspection date lands on
a weekend, the re -inspection will typically be performed the following Monday or
Tuesday. If all corrections are made before the 30 days, you can call to set up an earlier
re -inspection. *****Re inspection fees may be assessed for subsequent re -
inspections. Re -inspection fees start at $100, then $150, and $200 for all subsequent
re -inspections. -
Printed on 04/11/2024 @ 15:45
Page 13 of 14
GENERAL NOTES
JEREMIAH VANDYKE - 04/11/2024 @ 15:23 Lt. Van Dyke-jeremiah.vandyke@waterloo-ia.org - Work: 319-291-4460 - Cell: 319-883-
1615
JEREMIAH VANDYKE - 04/11/2024 @ 15:23 Inspection Fee = $80.00 (To be mailed out by City via snail mail.)
REINSPECTION DATE
05/11/2024
CONTACT SIGNATURE
Janet Herman - District manager Reason for not collecting a signature: NA
INSPECTOR SIGNATURE
JEREMIAH VANDYKE
Signed on: 04/11/2024 @ 15:44
QUESTIONS ABOUT TOUR INSPECTION?
JEREMIAH VANDYKE
jeremiah.vandyke@waterloo-ia.org
No phone number available
Printed on 04/11/2024 @ 15:45
Page 14 of 14