HomeMy WebLinkAboutCASEY'S 218 - 4010-4018 UNIVERSITY AVENUE OF WA? INVOICE DATE DUE DATE INVOICE# TOTAL DUE
0 08/12/2026 09/16/2026 2027-00000060 $80.00
�di0 . /* C
• •nuuImuw •
) �-=ir 0
Customer#: 3448 Please Make Check Payable and Remit To:
City of Waterloo
ATTN: City Clerk/Accounts Receivable
CASEY S 218 715 Mulberry St
4014 UNIVERSITY AV WATERLOO, IA 50703
WATERLOO,IA 50701
Amount Enclosed:
DETACH AND RETURN TOP PORTION WITH YOUR PAYMENT
KEEP THIS PORTION FOR YOUR RECORDS
COMMERCIAL FIRE INSPECTION-4010-4018 UNIVERSITY AVE- FOR BILLING INQUIRY: (319)291-4323
08/06/26
Description Total Price
INSPECTION 2,000 $70.00
OCCUPANCY FEE $10.00
CUSTOMER# BILLING DATE DUE DATE INVOICE# CHARGES
•
3448 08/12/2026 09/16/2026 2027-00000060 $80.00
Less Prepayment $0.00
Total Due -* $80.00
City of Waterloo
Failure to pay in full debts listed herein within ninety days of the due date will result in an additional twenty-five percent
late fee applied to any outstanding balance. The delinquent account will be forwarded to Municipal Collections of
America for further collection efforts. Debts shall also be subject to collection through the Iowa Department of
Administrative Services Offset Program if not paid in full within ninety days.
Waterloo Fire Rescue
)\k Inspection Report
425 E.3rd Street
.M,• Casey's 218 Pub-4010-4018 University AVE,BLDG 4010-4018 University Ave,
Waterloo IA 50701
INSPECTION DETAILS
Inspection Datc Inspection Type 2 Inspection Number
3Y08106/2026 Annual Inspection(1Yr) T 4 4 20.t° 17765
Lead Inspector Shift Station Una
BRAD BALDWIN N/A N/A N/A
Other Inspectors
NIA
SUMMARY OF INSPECTION
0 37 0 16 ® 27
Passed codes Failed codes NIA codes
NEXT STEPS
Please direct questions about your Inspection to:
Reinspection Date
BRAD BALDWIN
09/02/2026
brad.baldwin@waterloo-ia.org,3192914319
GENERAL NOTES
BRAD BALDWIN-08107/2026 @ 12:20
•$80 annual inspection fee
BRAD BALDWIN-08/0712026 @ 12:20
•Commercial Fire Inspector-brad.baldwin@waterloo-ia.org-Work:319-291-4319(#5)-Cell:319-230-1224
BRAD BALDWIN-08/07/2026 @ 12:20
•Provide corrections to avoid progressive re-inspection fees beginning at$100.Beer/Liquor application will not be signed until violations and hazards
corrected
BRAD BALDWIN-08/07/2026 @ 12:20
•If all corrections are made before the scheduled re-inspection date,you can call to set up an earlier re-inspection.Normal operating hours for
inspections&re-inspections are Monday-Friday,9:00 a.m.-4:00 p.m.*****Re inspection fees may be assessed for subsequent re-inspections.Re-
inspection fees start at$100,then$150,and S200 for all subsequent re-inspections.
BRAD BALDWIN-08/07/2026 @ 12:24
Iowa Smoke Free Air Act:Outdoor patio is prohibited from allowing smoking events due to meeting requirements of an enclosed area in a bar.
SIGNATURES
Contact signature Inspector signature
No signature
Report completed post inspection
Tony Perry 2026 Date:— BRAD BALDWIN 08/11/2026
CHECKLISTS
GENERATED ON 8/11/26, 3;17 PM
1 OF 10
Means of Egress
Code Description
Fail 1032.3-Obstructions.
A means of egress shall be free from obstructions that would Location:NW exit
prevent its use,including the accumulation of snow and ice. Comments:Downspout drain tile shall be removed from path of
egress exiting out of building.
•
4-40\
-.1111
2 OF 10
GENERATED ON 8/11/28, 3:17 PM
Additional Codes
Status Code Description
Fail 102.4-Application of building code.
The design and construction of new structures shall comply Location:Furnace-Near Beer Garden
with the International Building Code,and any alterations, Comments:Licensed mechanical contractor shall obtain permit and
additions,changes in use or changes in structures required inspection for furnace installed without permit.
by this code,which are within the scope of the International
Building Code,shall be made in accordance therewith.
if
11
rr
� t
Fail 5303.5.3-Securing compressed gas containers,cylinders
U and tanks. Location:Bar CO2 closet
Compressed gas containers,cylinders and tanks shall be Comments:Secure compressed gas cylinders with chain to avoid tip
secured to prevent falling caused by contact,vibration or over.
seismic activity.Securing of compressed gas containers,
cylinders and tanks shall be by one of the following methods:
1.Securing containers,cylinders and tanks to a fixed object
with one or more restraints.2.Securing containers,cylinders
and tanks on a cart or other mobile device designed for the
movement of compressed gas containers,cylinders or tanks.
3.Nesting of compressed gas containers,cylinders and tanks
at container filling or servicing facilities or in sellers'
warehouses not open to the public.Nesting shall be allowed
provided that the nested containers,cylinders or tanks,if
dislodged,do not obstruct the required means of egress.
4.Securing of compressed gas containers,cylinders and
tanks to or within a rack,framework,cabinet or similar
assembly designed for such use.Exception:Compressed gas
containers,cylinders and tanks in the process of
examination,filling,transport or servicing.
GENERATED ON 8/11/26, 3:17 PM
3 OF 10
Fail 5303.5.3-Securing compressed gas containers,cylinders
and tanks. Location:North storage area with overhead door
Compressed gas containers,cylinders and tanks shall be Comments:Secure compressed gas cylinders with chain to avoid tip
secured to prevent falling caused by contact,vibration or over.
seismic activity.Securing of compressed gas containers,
cylinders and tanks shall be by one of the following methods:
1.Securing containers,cylinders and tanks to a fixed object
with one or more restraints.2.Securing containers,cylinders
and tanks on a cart or other mobile device designed for the
movement of compressed gas containers,cylinders or tanks.
3.Nesting of compressed gas containers,cylinders and tanks
at container filling or servicing facilities or in sellers'
•
warehouses not open to the public.Nesting shall be allowed
provided that the nested containers,cylinders or tanks,if
dislodged,do not obstruct the required means of egress.
4.Securing of compressed gas containers,cylinders and
tanks to or within a rack,framework,cabinet or similar
assembly designed for such use.Exception:Compressed gas
containers,cylinders and tanks in the process of
examination,filling,transport or servicing.
Emergency Equipment
STaiu; Code
Description
Fail 1203.2.6-Exit signs.
Emergency power shall be provided for exit signs as required Location:SW exit near billiards area
in Section 1013.6.3.The system shall be capable of powering Comments:Repair or replace exit sign that failed to illuminate during
the required load for a duration of not less than 90 minutes. test.
4 OF 10
GENERATED ON 8/11/28, 3:17 PM
Electrical Safety
S:s.sis Code Description
Fail 603.4.1-Labeling.
Doors into electrical control panel rooms shall be marked Location:Mechanical room near Beer Garden
with a plainly visible and legible sign stating"ELECTRICAL Comments:Provide approved permanent signage on door indicating
ROOM"or similar approved wording.The disconnecting 'ELECTRICAL PANEL"to door.Laminated paper will not be accepted.
means for each service,feeder or branch circuit originating
on a switchboard or panelboard shall be legibly and durably
marked to indicate its purpose unless such purpose is clearly
evident.Where buildings or structures are supplied by more
than one power source,markings shall be provided at each
service equipment location and at all interconnected electric
power production sources identifying all electric power
sources at the premises in accordance with NFPA 70.
Fail 603.5.3-Installation.
Relocatable power tap cords shall not extend through walls, Location:West billiards area-South wall
ceilings,floors,under doors or floor coverings,or be subject Comments:Add second screw/nail to support
to environmental or physical damage. power strip to avoid
hanging by wires.
fur
ii _
:r% s '
,_._ ,...
4
, 4.1 i,
._ _
..._. _
_ .. \
GENERATED ON 8/11/28, 3:17 PM
5 OF 1.0
Fail 603.5.3-Installation.
Relocatable power tap cords shall not extend through walls, Location:West billiards area
ceilings,floors,under doors or floor coverings,or be subject Comments:Properly support power strip to avoid hanging by wires
to environmental or physical damage.
•
"i+
• -t
•
Fail 603.5.3-Installation.
Relocatable power tap cords shall not extend through walls, Location:Casino games near bar
ceilings,floors,under doors or floor coverings,or be subject Comments:Power strip behind games shall be properly mounted to
to environmental or physical damage. avoid hanging by wires.
6 OF 10
GENERATED ON 8/11/26, 3:17 PM
Fail 603.6-Extension cords.
Extension cords and flexible cordsshall not be a substitute Location:Mechanical closet near kitchen
for permanent wiring and shall be listed and labeled in Comments:Remove yellow extension cord.Approved to replace with
accordance with UL 817.Extension cords and flexible ro erl su
cordsshall not be affixed to structures,extended through e p y pported power strip with manual reset for low wattage
electronics only.
walls,ceilings or floors,or under doors or floor coverings,
nor shall such cords be subject to environmental damage or
physical impact.Extension cords shall be used only with
portable appliances.Extension cords marked for indoor use
shall not be used outdoors.
.rrm;
ir.
iiit
17.
iilor
/ \
s
r1`'x
7 4 '
- ! '
. ,11 ,.....
.;
Fail 603.6-Extension cords.
Extension cords and flexible cordsshall not be a substitute Location:Bar-Above sinks
for permanent wiring and shall be listed and labeled in
Comments:Remove flexible supply cord from above drop ceiling,
accordance with UL 817.Extension cords and flexible flexible wiring shall not extend through concealed spaces.
cordsshall not be affixed to structures,extended through
walls,ceilings or floors,or under doors or floor coverings,
nor shall such cords be subject to environmental damage or
physical impact.Extension cords shall be used only with
portable appliances.Extension cords marked for indoor use
shall not be used outdoors.
Fail 603.6-Extension cords.
Extension cords and flexible cordsshall not be a substitute Location:Bar-Above"Ole Smoky"mini fridge
for permanent wiring and shall be listed and labeled in Comments:Remove brown extension cord,shall not be used as
accordance with UL 817.Extension cords and flexible permanent wiring.Would approve replacing with properly supported
cordsshall not be affixed to structures,extended through pp p 9 c p Y
power strip with manual reset for low wattage electronics only.
walls,ceilings or floors,or under doors or floor coverings,
nor shall such cords be subject to environmental damage or
physical impact.Extension cords shall be used only with
portable appliances.Extension cords marked for indoor use
shall not be used outdoors.
GENERATED ON 8/11/28, 3:17 PM 7 OF 1a
Commercial Cooking Hood Suppression System
Description
Fail 606.3.3-Cleaning.
Hoods,grease-removal devices,fans,ducts and other Location:Kitchen hood exhaust
appurtenances shall be cleaned at intervals as required by Comments:Exhaust system cleaning 283 days past due.Provide
Sections 606.3.3.1 through 606.3.3.3. cleaning and report to be uploaded to Compliance Engine with any
deficiencies corrected.
Fail 606.3.3.1-Inspection.
Hoods,grease-removal devices,fans,ducts and other Location:Kitchen hood suppression system
appurtenances shall be inspected at intervals specified in Comments:Provide suppression system inspection report with any
Table 606.3.3.1 or as approved by the fire code official. deficiencies corrected.Contractor must upload report to Compliance
Inspections shall be completed by qualified individuals. Engine.Currently 238 days past due.
GENEP'TED ON 8/1.1/26, 3:17 PM 8 OF 10
Portable Fire Extingusihers
Status Co:,,. Description
Fail 906.2-General requirements.
OPortable fire extinguishers shall be selected,installed and Comments:Provide annual service to all extinguishers currently due
maintained in accordance with this section and NFPA 10. August 2026
Exceptions:1.The distance of travel to reach an extinguisher
shall not apply to the spectator seating portions of Group A-5
occupancies.2.Thirty-day inspections shall not be required
and maintenance shall be allowed to be once every 3 years
for dry-chemical or halogenated agent portable fire
extinguishers that are supervised by a listed and approved
electronic monitoring device,provided that all of the
following conditions are met:2.1.Electronic monitoring shall
confirm that extinguishers are properly positioned,properly
charged and unobstructed.2.2.Loss of power or circuit
continuity to the electronic monitoring device shall initiate a
trouble signal.2.3.The extinguishers shall be installed inside
of a building or cabinet in a noncorrosive environment.
2.4.Electronic monitoring devices and supervisory circuits
shall be tested every 3 years when extinguisher maintenance
is performed.2.5.A written log of required hydrostatic test
dates for extinguishers shall be maintained by the owner to
verify that hydrostatic tests are conducted at the frequency
required by NFPA 10.3.In Group 1-3,portable fire
extinguishers shall be permitted to be located at staff
locations.
Fail 906.6-Unobstructed and unobscured.
1 Portable fire extinguishers shall not be obstructed or Location:Kitchen
obscured from view.In rooms or areas in which visual
Comments:Remove signage indicating location of extinguisher.obstruction cannot be completely avoided,means shall be
provided to indicate the locations of extinguishers. Extinguisher has been relocated
t
k 1 l ,,
ti
tiff ,.
if 4" Ll
N k- A f/
GENERATED ON S/11/28, 3:17 PM
9 OF 10
Statement of Fees
FEE
Invoice Date Inspection Fee Date Paid Amount Paid
NIA $80.00
Invoice Number Check Number Transaction Number
NIA NIA NIA
II
10 OF 10
GENERATED ON 8/11/26, 3:17 PM