HomeMy WebLinkAboutFIBERGLASS REINFORCED PANELING_Rev_0Five Sullivan Brothers CC Kitchen Plmb Improvements 06 83 16
City of Waterloo FIBERGLASS REINFORCED PANELING
INVISION #16021 1 of 2
SECTION 06 83 16
FIBERGLASS REINFORCED PANELING
PART 1 GENERAL
1.01 SECTION INCLUDES
A. Fiberglass reinforced plastic panels.
B. Trim.
1.02 RELATED REQUIREMENTS
A. 07 92 00 - Joint Sealants.
1.03 REFERENCE STANDARDS
A. ASTM D256 - Standard Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics;
2010 (Reapproved 2018).
B. ASTM D2583 - Standard Test Method for Indentation Hardness of Rigid Plastics by Means of Barcol
Impressor; 2013a.
C. ASTM D3273 - Standard Test Method for Resistance to Growth of Mold on the Surface of Interior
Coatings in an Environmental Chamber; 2016.
D. ASTM D5319 - Standard Specification for Glass-Fiber Reinforced Polyester Wall and Ceiling Panels;
2017.
E. ASTM E84 - Standard Test Method for Surface Burning Characteristics of Building Materials; 2018.
F. FM 4880 - Approval Standard for Class 1 Fire Rating of Building Panels or Interior Finish Materials; 2015.
1.04 SUBMITTALS
A. Product Data: Provide data on specified products, describing physical and performance characteristics;
including sizes, patterns and colors available; and installation instructions.
1.05 DELIVERY, STORAGE, AND HANDLING
A. Store panels flat, indoors, on a clean, dry surface. Remove packaging and allow panels to acclimate to
room temperature for 48 hours prior to installation.
PART 2 PRODUCTS
2.01 MANUFACTURERS
A. Fiberglass Reinforced Plastic Panels:
1. Crane Composites, Inc: www.cranecomposites.com.
2. Marlite, Inc: www.marlite.com.
3. Nudo Products, Inc: www.nudo.com.
4. Panolam Industries International, Inc: www.panolam.com.
2.02 PANEL SYSTEMS
A. Wall Panels:
1. Panel Size: 4 by 8 feet.
2. Panel Thickness: 0.10 inch.
3. Surface Design: Embossed.
4. Color: White.
5. Attachment Method: Adhesive only, with trim and sealant in joints.
2.03 MATERIALS
A. Panels: Fiberglass reinforced plastic (FRP), complying with ASTM D5319.
1. Surface Burning Characteristics: Maximum flame spread index of 25 and smoke developed index
of 450; when system tested in accordance with ASTM E84.
2. Class 1 fire rated when tested in accordance with FM 4880.
3. Mold Resistance: Score of 10, when tested in accordance with ASTM D3273.
4. Scratch Resistance: Barcol hardness score greater than 35, when tested in accordance with ASTM
D2583.
5. Impact Strength: Greater than 6 ft lb force per inch, when tested in accordance with ASTM D256.
B. Trim: Vinyl; color coordinating with panel.
C. Adhesive: Type recommended by panel manufacturer.
D. Sealant: Type recommended by panel manufacturer; white.
Five Sullivan Brothers CC Kitchen Plmb Improvements 06 83 16
City of Waterloo FIBERGLASS REINFORCED PANELING
INVISION #16021 2 of 2
PART 3 EXECUTION
3.01 EXAMINATION
A. Verify existing conditions and substrate flatness before starting work.
B. Verify that substrate conditions are ready to receive the work of this section.
3.02 INSTALLATION - WALLS
A. Install panels in accordance with manufacturer's instructions.
B. Cut and drill panels with carbide tipped saw blades, drill bits, or snips.
C. Apply adhesive to the back side of the panel using trowel as recommended by adhesive manufacturer.
D. Apply panels to wall with seams plumb and pattern aligned with adjoining panels.
E. Install panels with manufacturer's recommended gap for panel field and corner joints.
F. Place trim on panel before fastening edges, as required.
G. Fill channels in trim with sealant before attaching to panel.
H. Install trim with adhesive and screws or nails, as required.
I. Seal gaps at floor, ceiling, and between panels with applicable sealant to prevent moisture intrusion.
J. Remove excess sealant after paneling is installed and prior to curing.
END OF SECTION