HomeMy WebLinkAboutLOADING DOCK BUMPERS_Rev_0Five Sullivan Brothers CC Kitchen Plmb Improvements 11 13 13
City of Waterloo LOADING DOCK BUMPERS
INVISION #16021 1 of 2
SECTION 11 13 13
LOADING DOCK BUMPERS
PART 1 GENERAL
1.01 SECTION INCLUDES
A. Dock bumpers of reinforced rubber with attachment frame.
1.02 SUBMITTALS
A. Product Data: Indicate unit dimensions, method of anchorage, and details of construction.
PART 2 PRODUCTS
2.01 MANUFACTURERS
A. Dock Bumpers:
1. Blue Giant Equipment Corporation: www.bluegiant.com.
2. Chalfant Sewing Fabricators, Inc: www.chalfantusa.com.
3. Durable Corp: www.durablecorp.com.
2.02 COMPONENTS
A. Bumpers: Fabric reinforced rubber pads, ozone resistant, laminated and compressed in position with two
galvanized steel rods with threaded ends, washers and nuts; between 3 by 2-1/2 by 1/4 inch galvanized
steel angle end plates:
1. Projection From Wall: 3 inches.
2. Vertical Height: 10 inches.
3. Width: 24 inches.
PART 3 EXECUTION
3.01 EXAMINATION
A. Verify that anchor placement is acceptable.
3.02 INSTALLATION
A. Install dock bumpers in accordance with manufacturer's instructions.
B. Set plumb and level.
C. Secure angle end frames to concrete.
D. Weld angle end frames to steel dock frame. Touch up weld with primer.
3.03 SCHEDULES
A. Loading Dock Bumpers: Provide quantity to match existing number of dock bumpers; nominally 2 feet
wide and 1 feet tall.
END OF SECTION